AQUAPHOR softeners are an advanced alternative to classic water purifiers. The solution is particularly effective, with low salt consumption and a small amount of water needed for refreshments.
THE AQUAPHOR S550 CONTAINS 15 LITERS OF CHLORINE-RESISTANT ION EXCHANGE RESIN. This is a popular solution for treating hard water. The system doesn't take up more space than a washing machine, so there's no need for a separate service space.
Save up to 60% salt
Thanks to the unique tank design and highly accurate ion exchange resin, resulting in increased salt efficiency.
2 in 1: soften water and remove iron,
Remove high concentration of iron (up to 15 mg/L concentration in water) and hard salts.
Very small use of water for recovery
Innovative patented dual-core valves for the AQUAPHOR air conditioner ensure trouble-free long-term performance while wasting little water.
10 years warranty on key parts.
A thick, high-strength shaft made of monolithic fiberglass composite will last for 10 years, while other columns will usually last less than 5 years.
Low maintenance
In addition to the low salt consumption system, ion exchange resin lasts 10 times longer than conventional water purifiers.
Works efficiently even at very low feed pressure,
Fully recyclable body and container
and NSF certified
Technical specifications of Aquafor S550
Model S550
Maximum capacity, 1 044 grams
Maximum compensated hardness, mg/L 840
Maximum iron reduction ferro, ppm*10
Minimum pH, standard units 7
Water and ambient temperature minimum and maximum, °C 4°-49°
Minimum water pressure - maximum, bar 1,4 - 7
Maximum flow rate to discharge during regeneration, l/min** 7.6
Low service flow rate (@1.0 bar), l/min*** 20.8
Pressure drop (@22.7 l/min), bar 1
Capacity in HE mode, kg salt/gram hardness 0.6 / 392
Salt saving mode, min/l 17/49
Capacity in HC mode, kg salt/gram hardness 1.8 / 821
High capacity HC mode, min/liter 23/63
Maximum capacity in AU mode, kg/g 3.3/1044
AU maximum capacity mode, min/litre 30/75
Rated controller type
Intelligent renewal method, by water meter
Electrical Rating 12 VAC, 50/60 Hz, 0.015 kWh
Plumbing Connections (NPT) 1 inch Male (MNPT)
Minimum exchange line ID, cm) 1.6
Media tank volume - (ID × height), cm 26.7 × 27.7
Height, 55.4 cm
Footprint, cm 32.2 × 43.2
Shipping weight - approx., 35 kg
Fine resin mesh 15
Drainage line (minimum ID) 5/8" (1.6 cm)
Total brine and rinse, l/min 2.8
Saline withdrawal, l/min 0.9
Rinse, l/min 1.9
Technical specifications of Aquafor S550
Use clean white granules, cube-shaped or solar salt.
* Iron reduction to 0.3 ppm or less.
** The flow rate at the end of the drainage line must be checked.
Prolonged operation of the water purifier at flow rates exceeding 20.8 l/min may affect performance. Intermittent flow rate should not exceed 35.2 l/min.
